Epoxy resin-based mortar.

Use :

Select Patch is intended for horizontal or vertical repairs and for shaping skirting boards.

Features :

• Category: Repair mortar
• Colour: Grey (± RAL 7030)
• Component(s): 2 components
• Packaging: 10kg (A: 9.71 g / B: 0.29kg)
• Application: Interior and exterior surfaces
• Complementary products Selectcolor epoxy primer: Select PrimerEP19 or EP20
• Coverage: 2 kg/m² per mm of thickness
• Storage: 12 months in original, unopened cans. Store at between 5°C and 40°C. Protect from bad weather and humidity as well as contamination.

SELECT PATCH FAST is a quick-drying epoxy resin-based mortar.

Use :

The Select Patch Fast is intended for horizontal or vertical repairs and for shaping skirting boards.

Features :

• Category: Repair mortar
• Colour: Grey (± RAL 7030)
• Component(s): 2 components
• Packaging: 5 kg (A: 4.826 kg / B: 0.174kg)
• Application: Interior and exterior surfaces
• Complementary products Selectcolor epoxy primer: Select Primer EP19 or EP20
• Coverage: 2 kg/m² per mm of thickness
• Storage: 12 months in original, unopened cans. Store at between 5°C and 40°C. Protect from bad weather and humidity as well as contamination.

Select SL EP / Select C EP is a coloured epoxy resin, with two or three components, for film-forming or self-levelling, and smooth or non-slip floor coverings.

The Select SL EP / Select C EP meets the requirements of the NF EN 13813 “Screed material” standard

Use :

The resin is used to protect heavy duty industrial floors, particularly those used in the following areas: factories, production workshops, laboratories, clean rooms, offices, etc.

Features :

• Category: Coloured epoxy resin for coatings and self-levelling surfaces
• Colour: Standard colours RAL 1001, 1015, 7030, 7032, 7035, 7037, 7040 and 7044.
• Component(s): Two or three components
• Packaging: Ready-mixed 12 or 24 kg kit (A: 9 kg / B: 3 kg / C: 12 kg)
• Coverage:
  • Coatings: from 0.25 to 0.3kg/m
  • Self-levelling surfaces: from 1.9 to 0.3kg/m²
• Storage: 12 months in original, unopened packaging. Store at between 12°C and 30°C, protect from humidity.
• Regulations: VOC < 500g/L according to directive EU-2004/42 (2010/CategoryIIA/Type PS)

Select SL EP HT (High Thickness) is a solvent-free coloured, three-component epoxy resin for self-levelling industrial floors with a thickness of 5 to 9mm.

Use:

Select SL EP HT is used to protect industrial floors and floors subject to very heavy loads, particularly those used in the following areas: factories, production workshops, car parks, reprofiling of surfaces after milling, etc.

Features:

• Category: Epoxy resin for very thick self-levelling floors
• Colour: Standard colours red 3000, grey 7035 and grey 7037.
• Component(s): Three components
• Packaging: Ready-mixed 24 kg kit (A: 9 kg / B: 3 kg / C: 12 kg) To save costs, it is possible to load with two or three bags of Select filler L (component C).
• Coverage: 10 kg/m² for 5mm-thick layer
• Storage: 12 months in original, unopened cans. Store at between 10°C and 25°C. Protect from bad weather and humidity as well as contamination.
• Regulations: VOC < 500g/L according to directive EU-2004/42 (2010/CategoryIIA/Type PS)

SELECT LIANT EP is a colourless, low-viscosity two-component epoxy binder with very minor yellowing. The product is nonylphenol-free and hypoallergenic. Due to its specific composition, SELECT BINDER EP has excellent slippage properties.

Use:

This solvent-free, non-pigmented system consists of both an epoxy resin and a corresponding hardener. The system is best used as a binder for decorative epoxy floors.

Features:

• Category: Epoxy binder
• Colour: Transparent – colourless
• Component(s): Two components
• Packaging: 4 and 8 kg tubs / 20 kg jerrycans / 200 kg drums
• Coverage: Gravel (2-3 mm) + 8% A + B mixture
• Storage: 12 months in original, unopened cans. Store at between 10°C and 25°C. Protect from bad weather and humidity as well as contamination.

PRIMER EP19 is a low-viscosity, nonylphenol-free, solvent-free epoxy, resin-based primer with excellent adhesion and wetting properties. It has a short hardening time (24 hours maximum) which makes this primer different from its “PRIMER EP20” counterpart.

Use:

Select Primer EP19 is used as a filler primer, as well as a capillary waterproofing agent on mineral supports, such as concrete, either indoors and outdoors. It is also perfect for use as a binder for levelling coats and repair mortars.

Features:

• Category: Epoxy resin-based primer.
• Colour: Colourless (glossy)
• Component(s): Two components
• Packaging: Ready-mixed 19 kg kit (A: 13 kg / B: 6 kg)
• Coverage: Depends on the surface
• Storage: 12 months in original, unopened cans. Store at between 5°C and 40°C. Protect from bad weather and humidity as well as contamination.

PRIMER EP20 is a low-viscosity, nonylphenol-free, solvent-free epoxy, resin-based primer with excellent adhesion and wetting properties.

Use:

Select Primer EP20 is used as a filler primer, as well as a capillary waterproofing agent on mineral supports, such as interior and exterior concrete. It is also perfect for use as a binder for levelling coats and repair mortars.

Features:

• Category: Epoxy resin-based primer.
• Colour: Colourless (glossy)
• Component(s): Two components
• Packaging: Ready-mixed 20 kg kit (A: 15 kg / B: 5 kg)
• Coverage: Depends on the surface
• Storage: 12 months in original, unopened cans. Store at between 5°C and 40°C. Protect from bad weather and humidity as well as contamination.

The Select GRANIT EP system is a laid and sanded terrazzo floor. It is made of epoxy resin and 0.2 to 4mm granite aggregates. The surface obtained is seamless, extremely hard and has an appearance just like natural stone.

Use:

Select GRANIT EP is used to create seamless floors with very high mechanical and chemical resistance. Thanks to its excellent wear resistance, the Select GRANIT EP is the perfect floor system for industrial areas with heavy traffic

Features:

• Category: epoxy resin and granite aggregates
• Surface: Concrete
• System thickness: 8 to 12 mm

SELECT CLEAR RS EP is a two-component resin with very good transparency. This product has very good resistance to UV and carbonation (after 24 hours at over 20 ° C). It also had very good resistance to chemical damage.

The product is completely free from solvents and nonylphenol. SELECT CLEAR RS EP has an extremely low volatile substances (VOCs) emission rate.

Use:

It is used as a binder in decorative mortars combined with coloured quartz. It can also be used in combination with different types of dry aggregates to make stone mats.
SELECT CLEAR RS EP is especially effective when used as a final coating with a thickness of 0.5 to 1 mm.

Features:

• Category: Primer, Binder or topcoat
• Colour: Colourless and Transparent (gloss)
• Component(s): Two components
• Packaging: Ready-mixed 12 kg kit (A: 8 kg / B: 4 kg) (can also be supplied in drums or IBC)
• Coverage:
  • Primer: 300 g/m²
  • Binder for mortar: 8 to 11% resin for quartz
  • Topcoat 100-200 g/m²
• Storage: 12 months in original, unopened cans. Store at between 5°C and 40°C. Protect from bad weather and humidity as well as contamination.

HYDROPOX is a paint with high mechanical and chemical resistance for use in interiors

Use:

HYDROPOX is a paint used to protect and decorate concrete walls and partitions. It is also often used in wine cellars, food industry production areas and industrial floors.
PLEASE NOTE: The system can be anti-slip

Features:

• Category: Two-component water-phase epoxy coating
• Colour: RAL, available in hydropox varnish. Transparent satin finish
• Component(s): Two components
• Packaging:
  • Component A: Coloured base: 16 kg, 7.5 l, 1.875 l
  • Component B: Epoxy hardener: 4 kg, 2.5 l, 0.625 l
  • Component A Hydropox varnish: 1.38 L
  • Component B Hydropox varnish: 625 ml
• Coverage: More or less 6-8 L/m² on a smooth and lossless support
• Storage: 12 months in original, unopened cans.

Our sealing compound is a two-component modified sealing epoxy with very good mechanical and chemical performance.

Use:

The sealing compound has excellent adhesion to concrete and metal.
This modified epoxy can also be used in the quarrying sector (cone crushers).

Features:

• Category: Epoxy coating used for sealing.
• Colour: Gives a gloss finish Colourless / greyish appearance
• Component(s): 2 components
• Packaging: 8 kg or 16 kg kit
• Application: Interior and exterior
• Complementary products: Select Primer EP19 or EP20
• Coverage: 1.38 kg/m² for 1mm-thick layer
• Storage: 1 year in original, unopened cans.

FINITION 160 is a high performance two-component floor paint.

Use:

FINITION 160 is perfect for concrete floors. The paint can be applied in locations containing chemicals and subject to high heat (max 150°C).

Features:

• Category: Solvent paint
• Colour: White
• Appearance: Gloss
• Component(s): 2 components
• Packaging: 5 kg
• Application: Interior and exterior surfaces
• Drying time: + – 24h
• Coverage: +- 140 g/m²
• Storage: 12 months in original, unopened cans.

The Select SL PU is a two-component floor paint. It is a flexible, two-component, solvent-free polyurethane self-levelling resin.

Use:

The SELECT SL PU is a system that stands up to pedestrian and forklift traffic in work areas such as workshops, packaging areas and car parks. It can be used on asphalt, wood, steel, concrete and screed.

Features:

• Category: Gloss, smooth floor finish
• Colour: Standard colours RAL 1015, 7016, 7035, 7037, 7044 and 9016.
• Component(s): Two components
• Packaging: Ready-mixed 20 kg kit (A: 16 kg / B: 4 kg) and 10 kg kit (A: 8 kg/B: 2 kg)
• Coverage: 3 kg/m² per 2mm
• Storage: 12 months in original, unopened cans. Store at any temperature between 5°C and 40°C. Protect from bad weather and humidity as well as contamination.

Select Deck P PU is a solvent-free polyurethane resin-based primer. It can also be used as a binder, or used to produce a non-slip coating.

Use:

The SELECT DECK PPU is used as a primer for the Select Deck system. It can be used on asphalt, concrete and screed.

Features:

• Category: PU primer
• Colour: Colours available on request – Gloss
• Component(s): Two or three components
• Packaging:
  • Ready-made 22.4 kg kits (A: 18.4 kg / B: 4 kg)
• Coverage: 1.5 Kg/m²
• Storage: 12 months in original, unopened cans. Store at between 5°C and 40°C. Protect from bad weather and humidity as well as contamination.

Select Deck C PU is a polyurethane resin-based finishing coating that is solvent-free, coloured and slightly flexible.

Use:

The SELECT DECK PPU is used as a coloured finishing coat for the Select Deck system. The system can be used to make a non-slip surface on asphalt, concrete and screed.

Features:

• Category: PU finish
• Colour: Standard colours RAL 7035, 7037, 7045 and 7047. Other colours available on request – Gloss
• Component(s): Two components
• Packaging: Ready-made 10 kg kits (A: 8 kg / B: 2 kg)
• Coverage: 0.5 – 0.8 Kg/m²
• Storage: 12 months in original, unopened cans. Store at between 5°C and 40°C. Protect from bad weather and humidity as well as contamination.

SELECT Deck EM PU provides a polyurethane waterproofing layer for crack bridging.

Use:

It is used in the Select DECK system for parking areas.

SELECT Deck EM PU membrane is a two-component, solvent-free, highly elastic waterproofing layer for surfaces with cracks or where cracks are likely to occur. The SELECT Deck EM PU membrane is highly elastic, even at very low temperatures (-20°C). It is therefore capable of bridging defects (cracks occurring due to static and / or dynamic stress) in the undercoat.

The SELECT Deck EM PU membrane is usually covered with another layer (wear or top coat).

Features:

• Category: Waterproof layer
• Colour: Standard grey colour
• Component(s): Two components
• Packaging: Ready-mixed 30 kg kit (A: 10 kg / B: 20 kg)
• Coverage: +- 2 kg/m²
• Storage: Store in unopened buckets in a dry place at temperatures between 15 and 25°C. Do not expose to direct sunlight.

SELECT DECK UV TV is a UV-stable two-component polyurethane topcoat.

Use:

SELECT DECK UV TC is used as a coloured finishing coat for the Select Deck system. It creates a top layer that is resistant and UV-stable. The SELECT DECK UV TC system can be used to produce a non-slip surface on asphalt, concrete and screed.

Features:

• Category: finish
• Colour: available on request (Gloss)
• Component(s): 2 components
• Packaging: 10 kg (A:6.84 kg/B: 3.16 kg)
• Storage: 12 months in original, unopened cans. Store at between 5°C and 40°C. Protect from bad weather and humidity as well as contamination.

Flexible, one-component polyurethane binder that is 100% solid and UV-stable.

Use:

Select Liant PU 1k is used as a binder for laying stone carpets in places where there is a risk of yellowing due to UV light.

Features:

• Category: PU binder
• Colour: Colourless
• Component(s): One component
• Packaging:
  • 1.75 kg
  • 3.5 kg
  • 7 kg
  • 21 kg
• Coverage: 6-7% binder + 93-94% sand / marble
• Storage: 12 months in original, unopened cans. Store at between 10°C and 40°C. Protect from bad weather and humidity as well as contamination.